HobbyWing XERUN 4268SD 2800KV G3 Motor Brushless 1/8 On/Road & GT
HobbyWing XERUN 4268SD 2800KV G3 Motor Brushless 1/8 On/Road & GT
Your cart will total 33 points that can be converted into a voucher of €0.99.
Description
HobbyWing XERUN 4268SD 2800KV G3 Motor Brushless 1/8 On/Road & GT
The Xerun 4268 G3 motor offers RC drivers of 1/8 on-road models great driving fun with even better performance. It's thanks to the improved design and the efficiency in combating the generated heat. Because compared to the G2 predecessor motos, this has been increased by 6%, which significantly reduces the heat generation.
100% Sensor Mode
With the built-in chip, the Xerun G3 motor can be recognized by Hobbywing Xerun XR8 ESCs. This combination results in a 100% sensor-controlled driving system. In addition, the hall sensor system ensures a clean and stable run in sensor mode.
Note: If the motor is connected to other ESCs, there is no guarantee that the sensor mode is active.
Turbo Timing Technology
When used with an ESC from the XERUN XR8 series, "Turbo Timing" can also be activated. This is already used very successfully in the 1/10 on-road section and also releases the last power reserves of the motor.
Features
- Low heat development
- Low detent torque
- High quality materials and excellent workmanship
- Easy installation
- Dustproof according to IP5X standard (1900kV, 2200kV and 2250kV)
Technical Specifications:
Scale: | 1/8 |
Type: | Brushless Sensored |
kV Rating: | 2800kV |
No-Load Current: | 6.1A |
Cells LiPo: | 2-4S |
Poles: | 4 |
Length: | 67.8mm |
Diameter: | 42mm |
Shaft Diameter: | 5mm |
Weight: | 300g |
Timing: | 20-40 degree (adjustable) |
Application: | 1/8 On-Road |
Contents
1x Motor
1x Sensor cable
1x Manual