Robitronic Expert LD-45 Charger LiPo 1-6S 5A 4x50W

Robitronic Expert LD-45 Charger LiPo 1-6S 5A 4x50W

The LD-45 charger is a microprocessor, computer-controlled charger / discharger and can process all common battery types. One of the highlights of this multi-charger is its 4 completely independent outputs. This means that a wide variety of battery types can be charged or discharged at the same time and you are ready to go again in no time.
It has the so-called "AUTO" function, which monitors and independently adjusts the charging current during the charging or discharging process. This is particularly important for lithium batteries in order to prevent overcharging and the associated explosion due to incorrect operation by the user. It can automatically disconnect the circuit and trigger an alarm in the event of a malfunction. All programs of this device are monitored by a "two-way connection" and the internal communication in order to achieve maximum security and to minimize problems. All settings can still be adjusted and predefined independently by the user!
The integrated balancer can handle up to 6S LiPo (lithium polymer), LiIon (lithium ion) or LiFe (lithium ferrum) batteries and provides up to 5 amperes of charging current per output. Thanks to its compatibility with almost all battery types such as Li-Ion / LiPo / LiFe, NiCd / NiMH or Pb, it doesn't matter whether you are operating electrical or combustion models in the field of aircraft, ship or car model construction, this charger is simply a "must." Have ".

The scope of delivery includes a comprehensive charging cable and adapter range such as Adapter for T-connector "Deans", JST, receiver, glow plug and alligator clips. For the integrated balancer connection there are also JST-EH adapters & JST-TP which should be sufficient for most batteries.

Characteristics:

4 independent charge / discharge outputs
Backlit LCD display
User-friendly and simple menu navigation
Integrated balancer for up to 6 cells and a tolerance of +/- 0.01V
Load, unload and store cargo
Display of single cell voltage / total voltage / capacity / temperature (with optional temperature sensor) / charging time / and much more.
Many different loading programs, including e.g. a special one to be able to store batteries perfectly longer
for various battery types NiCd / NiMH / LiPo / LiFe / LiIon / PB
Data storage for up to 10 loading or unloading data
Charging and discharging cycle program to automatically charge and discharge NiMH / NiCd batteries up to 5 times. Ideal to reactivate old or defective batteries.
Optional temperature sensor available (R01011)

Technical specifications:

Input voltage DC: 11-18V
Charging current: 0.1-5.0A (per output)
Discharge current: 0.1-1.0A (per output)
Max. Charging power: 50W x 4
Max. Discharge power: 5W x 4
Max. Balancer compensation current: 300mA
Max. Balancer measurement tolerance: +/- 0.01V
Number of cells (NiMH / NiCd): 1-15 cells
Cell number (LiPo / LiIon / LiFe): 1-6 cells
Number of cells (Pb): 1-10 (2-20V)
Weight without cable: 1090g
Dimensions: 220 x 150 x 55mm

Scope of delivery:

1x LD-45 charger
1x connection cable for power supply (permanently installed)
2x crocodile clips for connection cables
1x balancer adapter JST - EH
1x balancer adapter JST - TP
6x charging cable (T-connector "Dean" / BEC / Futabe / glow plug starter / Tamiya / crocodile clips)