Earn 98 points/€2.94
(Each €5.00 spent = 1 point, 1 point = €0.03 discount)
RC Electric Car BMT 801GT EP RTR 1/8 On/Road Brushless
BMT 801GT EP is a competition model in the RTR version that pleases both professionals and beginners drivers.
It’s supplied already pre-assembled to 99%, you only necessary to add the batteries to the radio control.
Chassis:
The chassis is in ergal 7075 of new generation, with Hard anodization.
It’s has already the front and rear reinforcements.
All the transmission of the model are cardan, at the front CVA homokinetic, the crowns and pinions of the differentials are made of steel and the whole turns on ball bearings.
The shock absorbers are hydraulic (with oil), are of the new Big Bore 17mm type and are completely in aluminum with a 4.0mm steel stem and adjustable by means of a ring nut to vary the spring hardness.
The shock absorber supports are in ergal 7075 from 4mm thick and have various holes for fixing the shock absorbers in order to change the attitude.
The suspensions are fully adjustable, with upper triangle, at the front, with adjustable position and rear tie rod. All angle are adjustable like camber, convergence, height etc.
In addition, the front and rear suspensions are equipped with adjustable anti-roll bars for maximum perfomances!
The whole electronic part is protected by an airtight dustproof box with extra battery box to balance the weight of the model.
The lexan body is supplied already painted, in the splendid white/blue racing livery.
The tires and rims are supplied in the kit, they are slick with medium compound that fit most of the track.
Engine and electronic regulator:
It’s Included all the electronics that are produced by HobbyWing. With 2000 KV electric motor and 100A regulator.
All electronics are Waterproof, and supports Lipo batteries, up to 4S.
All parameters can be set using the appropriate Program Card included.
Radio system:
The 3-channel radio remote control included, has 2.4ghz Specktrum technology, while the servo control is produced by Savox and is 14kg of torque, metal gears and waterproof.
Here are some features of this model:
99% RTR
2.4ghz radio remote control
HobbyWing Electronics
Servo control by Savox 14kg metal gears
Body included
3mm ergal frame
Suspension pins in steel
Electronics in an airtight box
ESC 100A
3 Geared differentials
17mm Big Bore shock absorbers
Front shock absorber support in 4mm ergal
Rear shock absorber support in 3mm ergal
Chassis reinforcements
Rear mud guards
Rear and front stabilizer bars
Adjustable steel tie rods
Adjustable metal shock absorbers
Program Card included
Technical data:
Scale: 1/8
Length: 460mm
Width: 306mm
Height: 140mm
Pitch: 322mm
Weight: 3600g
To complete the model car:
4 AA batteries
3S or 4S Lipo battery
