Earn 72 points/€2.16
(Each €5.00 spent = 1 point, 1 point = €0.03 discount)
RC Car BMT 801 Buggy RTR 1/8 Off/Road
BMT 801 is a competition model in the RTR version that pleases both professionals and beginners drivers.
It’s supplied already pre-assembled to 99%, you only necessary to add the batteries to the radio control.
Chassis:
The chassis is in ergal 7075 of new generation, with Hard anodization.
It’s has already the front and rear reinforcements.
All the transmission of the model are cardan, at the front CVA , the crowns and pinions of the differentials are made by steel, and the whole turns on ball bearings.
The shock absorbers are hydraulic (with oil), they are of the new Big Bore 17mm type and are completely in aluminum with a 4.0mm steel stem and adjustable by means of a ring nut to vary the spring hardness.
The shock absorber supports are in ergal 7075 from 4mm thick and have various holes for fixing the shock absorbers in order to change the attitude.
The brakes Pads are in Real Ferodo, with the same process of realization of the true cars 1/1. They are double disc, one acting on the front axle and one acting on the rear axle in order to vary the braking power on the two axles.
The suspensions are fully adjustable, with upper triangle, at the front, with adjustable position, and rear tie rod. All angles like camber, convergence, height etc. they are adjustable.
In addition, the front and rear suspensions are equipped with adjustable anti-roll bars for maximum perfomances!
The whole electronic part is protected by an airtight dustproof box with extra battery box to balance the weight of the model.
The lexan body is supplied already painted, in the splendid white/blue racing livery.
The tires and rims are supplied in the kit, they are pin with medium compound that fit most of the land.
Engine:
It’s Included, of course, the new Hyper 21 Turbo engine with In-Line Tuned Pipe and competition clutch.
The carburetor is of new generation to ensure maximum regularity of operation.
It starts easily thanks to the pull start.
Radio system:
The 3-channel radio remote control is included, it’s features of 2.4ghz Specktrum technology, the servos are produced by Savox and are 14kg of torque, metal gears and waterproof.
Here are some features of this model:
99% RTR
2.4ghz Radio remote control
Hyper .21 Turbo engine
Servos by Savox 14kg metal gears
Painted Body included
Chassis 3mm ergal
Suspension pins in steel
Electronics in an airtight box
Fuel tank with filter
Double disc brakes with racing pads
3 Gear differentials
Double-stage air filter
17mm Big Bore shock absorbers
Front shock absorber support in 4mm ergal
Rear shock absorber support in 3mm ergal
Chassis reinforcements
Rear mud guards
Rear and front stabilizer bars
Adjustable steel tie rods
In-Line competition muffler
Adjustable metal shock absorbers
Racing clutch
Technical data:
Scale: 1/8
Length: 460mm
Width: 306mm
Height: 140mm
Wheelbase: 322mm
Weight: 3600g
To complete the model car:
Eight AA batteries
Fuel and glow igniter
